Stain and Finishing Oil (SFO)

SKU: N/A Categories: ,

Stain and Finishing Oil (SFO) Fusion

Fusion Mineral Paint™ Stain and Finishing Oil (SFO) is a conditioner, stain, and topcoat combination that offers exceptional durability in high traffic areas like table tops, kitchen cabinets, and even flooring. This easy-to-use product can be used on bare wood or over previously painted surfaces.

Our Stain and Finishing Oil All in One does just as it says! It add colour, and adds a sealing oil at the same time! This oil is so easy to use!

The pigment in it stains your wood accentuating the grain.

 

SFO is a combination of natural oils and resins that penetrate into wood fibres to create a durable, scratch-resistant, waterproof finish. It does not leave a surface film that sits on top, but instead soaks into and becomes a part of your wood.

Over Fusion Mineral Paint™, we recommend removing excess right away, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.

 

Stain & Finishing Oil is available in Natural (no pigment), Golden Pine, White, Driftwood (grey), Cappuccino, and Ebony for all your wood stain needs.

Use the Natural color over Fusion Mineral Paint™ colours to increase the sheen and offer superior durability, or brush on one of the pigmented colours and wipe off immediately for a beautiful, easy glaze effect.

Our special blend is highly concentrated in pigment, so a little goes a long way. The 237 mL container will cover the same area as 1 litre of comparable stains, giving you 2-3 times more coverage than water-based stains.

Please keep in mind that all oil based products typically yellow in time. Using this over top of a white paint, will cause a slight yellowing effect.

Sizes Available : 237 mL (8.01 fl.oz.)

Colours Available : natural, golden pine, white, driftwood, cappuccino, ebony

Base : oil

Coverage : approx 40-75 sq ft (depending on wood density)

Finish/sheen : satin to gloss

Uses : use as a stain over raw or well-sanded wood; apply over painted surfacce for added sheen, glaze effect, or added protection; seal milk paint or other porous paint

Benefits:

  • Easy to use
  • Very durable
  • Low VOC
  • Low odour
  • All-in-one product: no conditioner or topcoat needed
  • Clean up : wipe up with absorbent rag. Use mineral spirits if necessary

Dry Time : 9 hours approx

Recoat Time : 9 hours approx

Cure time : 10 days approx

 

29,95

Stain and Finishing Oil (SFO)

Our Stain and Finishing Oil All in One does just as it says! It add colour, and adds a sealing oil at the same time!

This oil is so easy to use!

The pigment in it stains your wood accentuating the grain.